Communicate with Supplier? Supplier
Nanhai Airbag Mr. Nanhai Airbag
What can I do for you?
Contact Supplier
 Tel:86-531-88723323
Shandong Nanhai Airbag Engineering Co., Ltd.
I agree will authorize the transaction payment on is a subsidiary of group, Please rest assured to trade.
I agree
Home > Products > Marine Airbag > Ship Launching Airbag > 0.4 MPa Lifting Pneumatic Ship Launching Airbags

0.4 MPa Lifting Pneumatic Ship Launching Airbags

Payment Type:
Min. Order:
1 Case
Delivery Time:
12 Days
  • Product Description
Product Attributes

Model No.Ship Launching Airbag









Product NameShip Launching Airbag

Diameter RangeFrom 0.8m To 2.8m

Effective LengthFrom 6.0m To 24m

Lifespan8~10 Years

Supply Ability & Additional Informations

PackagingPallet with firm package or upon on client requirement



Place of OriginShandong China

Supply Ability1500pcs/year


HS Code40169500


Payment TypeL/C,T/T


Delivery Time12 Days

Packaging & Delivery
Selling Units:
Package Type:
Pallet with firm package or upon on client requirement

The air-bag application method for common medium ship launching is described as follows:

1. Based on calculation result, enough rolling air bags and lifting air-bags, towing machines and air compressors are prepared. Before using, an air bag shall be inflated and tested without load. In case of air leakage, the air bag must be repaired before using.

2. The roads for ship movement, including the road from the shipbuilding berth to ramp, must be cleaned up and flattened. Sundries must be removed from the roads, especially sharp iron nails andstone on the road, to avoid piercing the air bag. The ramp shall be enough long and wide in water3. All the protruding sharp corners and burrs on casting like"A" bracket and stern post and so on shall be ground flush/

4. Fasten the hull with the steel cable of traction winch.

5. Close all the sea chest valves on the ship, fix the rudder and propeller.

6. There are many ways to remove all blockes and fill in the rolling air bag.

7. Adjust pressure in the air bag so that the bottom can be lowered to appropriate working height. Make sure that the bottom will not touch the ground while moving the ship. For average small sized ship, the working height could be chosen Within the range of 0.2-0.3M.

8. All air bags shall be pointed at the center of the ship and perpendicular to the launching direction.

9. Start the traction winch to release steel cable slowing followed by slow movement of the ship. When the forefront air bag located in the front part separates from the bottom, it shall be put into the stern immediately and fill in the air bag according to the arrangmetn space of the air bag defined in the calculations.

10. Repeat the above process to move the ship to waterside slowly. When the air bag cannot be filled in, block the river and no ship is allowed to pass.

11. Evacuate personnel in the dangerous zone, inform staff on the ship to get ready. When conditions such as water depth and so on are gnough. Cut cable or unhook so that the ship can launch quickly. If the river is too narrow to realize quick launching, release the cable slowly by traction winch to launch the ship slowly.

12. For large ships, it`s necessary to install anti-skip device.

13. Collect air bags.

Ship Launching Marine Airbag Ship Launching Marine Airbag

The standard specification of Ship Launching Airbag

You can choose the required diameter and effective length to meet your projects

(1)Diameter: from 0.8m to 3.5m.

(2)Effective length: from 5m to 25m.

The above specifications only are our standard specifications arrange. Can be supplied customized size upon customers' request.

Major Strengths of Nanhai Airbag---Ship Launching Airbag

1.High safety level: equipped with a reliable safety valve, our airbags can stand the maximum pressure up to 4 times that of the operating pressure.

2.Good air tightness: pressure decreases less than 10% for a period of 24 hours.

3.Long lifespan: it is guaranteed that our airbags can sustain their designed operating pressure for 3 years.

4.A complete set of solutions is available.

Ship Launching Marine Airbag

Looking for ideal Ship Launching Marine Airbag Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Pneumatic Rubber Airbag are quality guaranteed. We are China Origin Factory of Marine Rubber Airbag for Ship. If you have any question, please feel free to contact us.

Product Categories : Marine Airbag > Ship Launching Airbag

Email to this supplier
  • *To:
    Mr. Nanhai Airbag
  • *Message:
    Your message must be between 20-8000 characters
Related Products List