Inflatable Marine Rubber Airbag for Lifting and Launching

Inflatable Marine Rubber Airbag for Lifting and Launching airabg 0.6m-1.5m

We supply customers with the reliable air bag and offer the design of air bag launching projects,air bag launching platforms and launching ramps.

We also provide the service of air bag launching calculation and technical training .Currently,our products and technologies have been successfully applied to the launching of ships with the weight of 15,000 tons ,and they are developed for the goa of satisfying larger ships launching demands.

We are wholeheartedly serving the domestic and overseas customers by supplying the top-ranking technical services and systematic technology implementation plans.

Marine Airbag description

As we all know ,Marine Airbag named ship rubber airbag, ship air bags, Boat Salvage Airbags, inflatable airbag, ship lifting bag,Ship Launching Airbag, ship salvage airbag, air balloon, made by rubber & multi layer of rubber-dipped tyre fabric.

Marine launching airbags characteristics:

1.Good air tightness:Our Company use high quality rubber, as material and the advanced manufacture process to assure that our products have good air tightness, especially air tightness of the assisted floated airbag.Our airbag can keep its pressure 24 hours with work pressure, the pressure will reduce less than 3%.

2.High strength:The polyamide cord thread for airbag is produced with high tension reinforced fiber.A cord thread has the strength more than 320N, and the cord fabric has consistent and reliable quality.

3.Wear resistance and anti-aging:An airbag often works in extreme conditions, for example, it is soaked in sea water, insolated in the direct sunlight and rolled in sand.

4.Safety and reliability:Giyo marine airbag with the optimized structure design has the safety coefficient of 4-6 times, namely that its bursting pressure is 4-6 times its work pressure.Our airbag has a multi-channel airbag mouth to enhance the strength and air tightness between the airbag body and mouth.

Airbags in use should pay special attention to matters

1) Air bag for a long time without or reused after repair, should be light air test. Air pressure is the same value from our factory test, test the inspection personnel should be at least 3 meters away from the airbag, large area of damage after repair of airbag, should be appropriate to reduce the working pressure. In addition, the use of airbags, a the inspection should be done every year

2)Contact with the air bag surface must not have sharp prominent hard objects, prevent punctured balloon epidermis

3)Try to avoid air bag length direction of distortion

4)Strictly control the use of pressure, must not exceed the safe working pressure

5)Do not drag on the ground balloon.